Mocka Porto Assembly Instructions

Corner shelves

Hide thumbs Also See for Porto:

Enlarged version

Porto Corner Shelves

Thank you for your purchase.

Please follow the instructions below for correct assembly.

50mm

25mm

screw x20

screw x2

Hardware Supplied

mocka.co.nz | mocka.com.au

wall plug

safety

strap x2

Phillips screwdriver required

WARNING:

Any furniture that is not anchored

to a wall has the potential to tip over in certain

circumstances, i.e. if a child attempts to climb

up on the furniture or in the event of an

earthquake. Accordingly, we recommend that

all furniture is anchored to a wall. We supply a

free safety wall anchor with all furniture sold

and we recommend these are used to prevent

your product tipping. The fixing device

provided should fit most wall types, but please

note that different wall materials may require

different fixing devices from those supplied.

Table of Contents

Do you have a question about the Porto and is the answer not in the manual?

Page 1 Porto Corner Shelves Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. WARNING: Any furniture that is not anchored to a wall has the potential to tip over in certain circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Page 2 Porto Corner Shelves Assembly Instructions Attach shelf panels [2], [3] and [4] to the main unit as shown and secure Attach shelf panel [1] into the unit and secure with 4x 50mm screws (A). with 12x 50mm screws (A). Tighten with a screwdriver.
Page 3 Porto Corner Shelves Assembly Instructions Attach the other end of the safety straps (D) to the wall using 2x wall plugs (C) and 2x 25mm scews (B). Tighten with a screwdriver. You’re done, enjoy! mocka.co.nz | mocka.com.au...