Accessing The Calibration Modes; Adjusting Calibration Values - Raymarine SPX-5 Installation & Setup Manual

46

Accessing the Calibration modes

Accessing
Calibration Modes
Calibration
Modes

Adjusting calibration values

To adjust calibration values:
1. Access the required calibration mode (refer to the diagram above).
disp
2. Press
press and hold
-1 +1, -10
,
3. Use
When you have made all required changes, press and hold
save changes and exit.
2 seconds
to scroll through the available options. To view the previous option,
disp
for 1 second.
+10
and to change the values
SmartPilot X-5 Wheel Installation & Setup Guide
2 seconds
(saves changes)
CAL ?
+
to enter display
calibration mode
to enter user
calibration mode
to enter seatrial
calibration mode
to enter dealer
calibration mode
standby
for 2 seconds to
D10647-1