40
Accessing the Calibration modes
Accessing
Calibration Modes
Calibration
Modes
You can only access Calibration mode from Standby mode:
1. With the SmartPilot in Standby mode, press and hold the standby key for 2
seconds. The display will change to show DISPLAY CAL.
2. Press the disp key to scroll through the 4 calibration groupings:
• Display Calibration (DISPLAY CAL)
• User Calibration (USER CAL)
• Seatrial Calibration (SEATRIAL CAL)
• Dealer Calibration (DEALER CAL)
You can go backwards through the groups by pressing and holding the
Note:
one second.
3. When you reach the Calibration group you want to access, press auto to
enter that group:
To prevent accidental access, we have made entry to Dealer Calibration more
2 seconds
SmartPilot Series Commissioning Guide
2 seconds
(saves changes)
CAL ?
+
+
(ST8001 & ST8002 only)
to enter display
calibration mode
to enter user
calibration mode
to enter seatrial
calibration mode
to enter dealer
calibration mode
D6407-2
key for
disp