Accessing The Calibration Modes; Adjusting Calibration Values - Raymarine SmartPilot X-5R Drive Installation & Setup

50

Accessing the Calibration modes

Accessing Calibration
Modes
Calibration
Modes

Adjusting calibration values

To adjust calibration values:
1. Access the required calibration mode (refer to the diagram above).
disp
2. Press
press and hold
-1 +1, -10
,
3. Use
When you have made all required changes, press and hold
save changes and exit.
SmartPilot X-5R Drive Installation and Setup Guide
2 seconds
to scroll through the available options. To view the previous option,
disp
for 1 second.
+10
and to change the values
2 seconds
(saves changes)
to enter Display
calibration mode
to enter User
calibration mode
to enter Seatrial
calibration mode
CAL
to enter Dealer
+
calibration mode
standby
for 2 seconds to
D10808-1