Removing The Wireless Lan Module - Clevo M740J Service Manual

Removing the Wireless LAN Module

1. Turn off the computer, remove the battery
2. The Wireless LAN module will be visible at point
3. Carefully disconnect cables
4. The Wireless LAN module
5
5. Lift the Wireless LAN module
a.
1
b.
(page 2 - 5) and the component bay cover
on the mainboard.
1
- , then remove screw from the module socket.
2
3 4
will pop-up.
(Figure 13d) up and off the computer.
c.
d.
4
3
2
(page 2 - 9) .
5
Removing the Wireless LAN Module 2 - 17
Disassembly
Figure 13
Wireless LAN
Module Removal
a. Remove the cover.
b. Disconnect the cable
and remove the screw.
c. The WLAN module will
pop up.
d. Lift the WLAN module
out.
Note: Make sure you
reconnect the antenna
cable to "1" + "2"
socket (Figure b).
5. WLAN Module.
• 1 Screw