Removing The Optical (Cd/Dvd) Device - Clevo M740J Service Manual

Removing the Optical (CD/DVD) Device

1. Turn off the computer, and remove the battery
2. M740J/M740JU: (see over for M760J/M760JU) Locate the component bay cover
3. Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.
4. Carefully disconnect the fan cable
5. Remove the screw at point
6
6. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
screw holes should line up).
7. Restart the computer to allow it to automatically detect the new device.
a.
3
2
M740J/M740JU
b.
(page 2 - 5).
, and remove the cover
1
5
, and use a screwdriver to carefully push out the optical device
c.
4
1
d.
1
c.
5
and remove screws
1
.
8
6
8
Removing the Optical (CD/DVD) Device 2 - 9
Disassembly
Figure 5
Optical Device
Removal
-
.
2 4
a. Remove the screws.
b. Disconnect the fan cable
at point .
7
and remove the cover.
c. Remove the screw.
d. Push the optical device
out off the computer at
point 7.
1. Component Bay Cover
8. Optical Device
7
• 4 Screws