Table of Contents
Advertisement
Disassembly
Removing the Optical (CD/DVD) Device
Figure 4
Optical Device
1. Turn off the computer, remove the battery
Removal
2. Locate the component bay cover and remove screws
3. Carefully (a fan and cable are attached to the under side of the cover) lift up the bay cover.
a. Remove the screws.
4. Carefully disconnect the fan cable
b. Remove the bay cover.
5. Remove the screw
c. Remove the screw.
d. Use a screwdriver to
6. Use a screwdriver to carefully push out the optical device
carefully push out the
7. Insert the new device and carefully slide it into the computer (the device only fits one way. DO NOT FORCE IT; The
optical device at point
screw holes should line up).
9
.
8. Restart the computer to allow it to automatically detect the new device.
7. Component Bay Cov-
er
10. Optical Device
• 6 Screws
2 - 8 Removing the Optical (CD/DVD) Device
6
.
8
a.
2
3
4
b.
6
(page 2 -
5).
(Figure 4a
-
1
5
, and remove the cover
.
7
at point
10
c.
1
5
d.
7
10
6
)
.
(Figure 4b
)
.
9
9
8
9
Advertisement
Table of Contents
