Table of Contents
Advertisement
FREQUENTLY ASKED QUESTIONS / TROUBLESHOOTING
The following are a sequence of lights and are used for assuring the proper function of the Geyser-RO
and to help diagnose the unit if a problem occurs.
On/Off Button
Green service light
Amber light is on
Red light is on
Green
Solid Green
Solid Amber
Solid Red
Power is on and unit is in standby.
Unit is producing hot water.
Unit is in the defrost cycle.
Unit is in over current. Push the red reset button
next to the power switch. The Geyser will now
operate normally. (There may be a 5 minute delay
in starting). If the situation persists, turn the
Geyser off and call for service. Call technical
support at Hubbell. 203-378-2659.
22
Advertisement
Table of Contents
