Hardware Specifications - Intel Storage System SSR212MA Configuration Manual

Hardware Specifications

Raw Storage Capacity
Drive Bays
Hard Disk Drive
Supported
Processor
Memory Capacity
Memory Type
DIMM Slots
Enclosure Controller
Temperature Sensor
SAF-TE Support
SATA Compliance
Client Connectivity
Serial Port
Front Panel
LEDs
Back Panel
Buttons and Switches
I/O Connectors
Power Receptacle
Chassis
Form Factor
Height
Width
Depth
Weight
Color
Rack Support
Expandable to 3.0 TB – using twelve 250 GB drives.
Expandable to 4.8 TB – using twelve 400 GB drives.
Expandable to 6.0 TB – using twelve 500 GB drives.
12 Serial ATA (SATA) Hot Pluggable.
3.5" SATA .
NOTE: For specific drive family and capacities supported, please refer to the
SSR212MA Tested Hardware and OS List (THOL).
Intel® Xeon™ processor 2.80 GHz with 1 MB L2 cache.
Expandable to 16 GB maximum.
NOTE: Please see memory expansion recommendations in section 1.2 of the Intel
Storage System SSR212MA Technical Product Specification.
Synchronous Dynamic Random Access Memory (SDRAM), DDR2-400, Registered,
ECC.
Six 184-pin DIMM sockets.
On-board Vitesse* VSC055 micro-controller .
Two temperature sensora are located on the backplane that allows drive cage
temperature monitoring by enclosure management.
The backplane firmware complies with version 1.00, rev 041497, of the SAF-TE
specification.
SATA 1.5 Gb/s, 3.0 Gb/s.
Client Connectivity via Internet Protocol Small Computer System Interface (iSCSI) Dual
GB Ethernet.
Management console port.
Fault, ID, Power.
Power button, Reset button.
1x RJ-45 COM B Serial port, 2x RJ-45 Ethernet ports.
1x IEC AC per installed power supply module.
2U rack-mount chassis.
86.7 mm, 3.41".
447 mm, 17.6".
631 mm, 24.8".
As shipped (zero drives): approximately 16 kg, 35.2 pounds.
Fully configured (twelve drives): approximately 27.5 kg, 61 pounds.
Shipping container: 3.2 kg, 7 pounds.
Black.
Rail mount, compatible with four-post rack mount only.
8