Pedal Settings; Changing How The Damper Pedal Is Applied (Damper Pedal Part); Changing How The Pedals Work (Center/Left Pedal Function) - Roland RP201 Owner's Manual

Pedal Settings

Changing How the Damper Pedal is Applied
(Damper Pedal Part)
When you press the damper pedal during Dual play or Split play, the
damper pedal effect is normally applied to both tones, but you can
also select the tone to which the effect is to be applied.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate "Fnc" and you'll be in Function mode.
2.
Press and hold the [Strings] button and use the [–] or [+]
button to select "dPr."
3.
Release the [Strings] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
All enabled
Applied only to Tone 1 (in dual play)/Right-hand Tone
(in split play)
Applied only to Tone 2 (in dual play)/Left-hand Tone (in
split play)
5.
Press the [Song] or [Metronome] button to leave
Function mode.
You can use the Memory Backup function to store this setting
in internal memory (p. 44).
Changing How the Pedals Work
(Center/Left Pedal Function)
When you turn on the power, the left pedal functions as the soft
pedal, and the center pedal functions as the sostenuto pedal (p. 19).
You can change the function of the pedal to a variety of other
operations.
1.
Hold down the [Song] button and press the [Metronome]
button.
The display will indicate "Fnc" and you'll be in Function mode.
2.
Hold down the [Strings] button and use the [–] [+]
buttons to select the pedal whose function you want to
change.
Setting Explanation
Center Pedal
Left Pedal
3.
Release the [Strings] button to see the current setting.
4.
Use the [–] [+] buttons to change the setting.
Setting Explanation
Sets function to sostenuto pedal.
(Selectable only for the center pedal)
Sostenuto
Sets function to soft pedal.
(Selectable only for the left pedal)
Soft
The pedal will have the same function as the
[
Play/Stop
Pressing the pedal will layer on Tone 2, used for Dual
play.
* The Layer function can be applied only when using
Layer
Dual play.
Pressing the pedal will layer on a sound one octave
higher.
* The Octave function cannot be applied while using
Octave
Twin Piano, Dual play, or Split play.
"Layer" and "Octave" cannot be specified simultaneously for
the center and left pedals.
5.
Press the [Song] or [Metronome] button to leave
Function mode.
Various Settings
] button.
37