Assigning Functions To Pedals (Pedal) - Roland RD-2000 Parameter Manual

Detailed Settings for a Program (Program Edit)
Parameter Value
Key Touch
-10–+9
Offset
REAL
Velocity
1–127
Velo Delay Sens -63–+63
Velo Key Follow
-63–+63
Sens
STANDARD
Key Off Position
DEEP
6
Explanation
This setting provides even
more precise adjustment of the
key touch than available with
the Key Touch setting alone.
The touch sensitivity becomes
heavier as the value increases.
When this parameter is set to
a value that exceeds the upper
or lower limit, the setting for
Key Touch (one of five possible
values) is automatically
changed to accommodate the
value you've specified.
Volume levels and the way
sounds are played change in
response to the velocity.
Regardless of how strongly
you play the keyboard, volume
levels and the way sounds are
played always reflect the fixed
velocity value you specify here.
As the value is decreased, the
timing of the sound is delayed
more when more force is used
to play the keys. As the value
is increased, the timing of the
sound is delayed more when
less force is used to play the
keys.
As the value is increased, the
touch becomes heavier in the
upper registers, and lighter in
the lower registers.
Note-off occurs at the key
depth of a conventional piano.
Note-off occurs at a deeper
position. This is suitable for
electric piano sounds.

Assigning Functions to Pedals (Pedal)

This setting determines the function of the pedal switches (such as
the optional DP series) or expression pedals (such as the optional
EV-5) that are connected to the FC1, FC2, and EXT jacks on the rear
panel.
1
In the PROGRAM EDIT MENU screen, select
and press the [ENTER] button
2
Select the parameter that you want to edit, and use
the [DEC] [INC] buttons
value.
The assigned function is controlled between the minimum value
(Min) and maximum value (Max). If Min is set to a greater value
than Max, the change is reversed.
FC1/FC2/EXT pedals
Parameter Value
Selects the function to be assigned to each
pedal.
Func
* For details on the values, refer to
(Function)
Functions Assignable to Pedals, Knobs, and
Buttons"
Range Min 0–127
Range Max
0–127
MEMO
By specifying the Range Min/Max settings, you'll be able to
control the function in the desired range; this will help you
obtain the performance result that you want.
*1 Depending on the function that you assign, the value might
not have the range of 0–127. In this case, the setting of 0–127
is converted appropriately for the function that's assigned.
If you assign a function that is switched on/off, it turns off at
Min and turns on at Max.
If you assign an on/off function to an expression pedal, it
switches on/off at the value that is mid-way between Min and
Max.
"Pedal"
(p. 4).
or the value dial to edit the
Explanation
"List of
(p. 8).
Specifies the value when
the pedal is not pressed
(minimum value) (*1).
Specifies the value when the
pedal is advanced to its fullest
extent (maximum value) (*1).