Preface - Siemens SIMATIC TI505 User Manual

Purpose of this
Manual
Related Manuals
Technical
Assistance
SIMATIC TI505/TI500 MODNIM User Manual
This manual provides the following information on the Series 505
Series 500 MODNIM (Modbus
numbers PPX:505–5184 and PPX:500–5184.
Basic features of the MODNIM
Installation and configuration
Diagnostic self-testing procedures
Operating instructions
Modbus commands and error responses
MODNIM specifications
The following publications contain related information which supplement
this manual.
Series 505 Manuals
SIMATICr TI505
SIMATIC TI505 TISOFT
SIMATICr TI525 /TI535
SIMATICr TI545
Series 500 Manuals
SIMATICr TI520C /TI530C
Series 500 I/O Base User's Manual
SIMATICr TI560 /TI565
The following Gould Modicon publications are also recommended.
Gould Modbus Protocol (part no. PI-MBUS-300 Rev B)
Modbus System Planning (part no. PI-MBUS-PLN)
Gould Modicon J474/J475 Interface (part no. PI-J475-001 Rev B)
If you need information that is not included in this manual, or if you have
problems using the module, contact your Siemens Industrial Automation,
Inc. distributor or sales office. If you need assistance in contacting your
distributor or sales office in the United States, call 1–800–964-4114.
Network Interface Module), model
Programming Reference Manual
User Manual
Hardware and Installation Manual
System Manual
Programmable Controller Manual
Programming Manual

Preface

and
Preface ix