Using Other Functions Pssschshsohshseshshsshhsosshssssssshosehsehhtchhsesehshesoloreshode; Disabling Everything Except Piano Play (Panel Lock); Changing The Key When Playing Back Songs; Adjusting The Piteh.of The Sound (Master Tuning) Yecetaciecnsien Arrears Iceeiaiainlnc Wird - Roland HP 337 Owner's Manual

Using Other Functions
Disabling Everything Except
Piano Play (Panel Lock)
Making the setting for the panel lock enables a state where
only piano play is possible, and all buttons are disabled.
This prevents accidental changes to the settings during piano
practice, even if, for example, a child mistakenly presses one
of the buttons.
1. Turn down the volume all the way.
2. Turn off the power.
3. While holding down the [Function] button, press
the [Power] switch to turn the power on. Then,
continue to hold down these two buttons fora
few seconds.
"as
_.." appears in the display.
4. Adjust the volume.
All buttons are disabled.
When you play the keyboard, "Grand Piano 1" tone is
played.
By turning the power off and then on once again, the
keyboard returns to its normal status with Panel Lock
cancelled.
Changing the Key When
Playing Back Songs
You can play back the internal songs in a different key.
When you then select a different song, the keyboard reverts
to its original key.
1. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the [Transpose] button.
3. Use the Variation [+] and [-] buttons to choose a
transposition value.
Each press of the [+] or [-[ button raises or lowers the key
by one hal{-step (semitone).
4. Press the [Function] button.
The [Function] button's indicator goes out.
Adjusting the Pitch of the
Sound (Master Tuning)
In situations such as when playing ensemble with other
instruments, you can tune the HP 337's reference pitch to the
pitch of another instrument.
Middle A is generally used as the standard reference pitch
for tuning instruments. When performing in ensemble with
other instruments, ensure that each instrument's basic pitch
is in tune with that of the other instruments. This tuning of
all the instruments to a standard pitch is called "Master
Tuning."
1. Press the [Function] button.
The [Function] button's indicator blinks.
2. Press the [Piano] button.
3. Using the Variation |+] and [-] buttons, change
the standard pitch.
The standard pitch for the HP 337 can be set to any
frequency from 415.3 to 466.2 Hz.
"440.0 Hz" is the power-on default for the standard
pitch.
Lwir
"TLILI
The last three digits are indicated in the display. "440.0
Hz" is indicated in the figure above.
Pressing both the [+] and |-] buttons simultaneously sets
it to "440.0Hz."
A, Press the [Function] button.
The [Function] button's indicator goes out.
44