Printer Condition Settings; Printer Default Settings - Sharp MX-5500N System Settings Manual

Printer Condition Settings

The Printer Condition Settings are used to configure basic printer settings and settings for printing from a DOS
application. To configure the settings, touch the [Printer Condition Settings] key.

Printer Default Settings

The default settings are used to set advanced print conditions for printing in an environment where the print driver is not
used (such as printing from MS-DOS or from a computer that does not have the provided print driver installed).
When printing using the printer driver, the printer driver settings take precedence over the printer condition settings.
Settings
Item
Copies
Orientation
Default Paper Size
Default Output Tray
Default Paper Type
2
Line Thickness*
2-Sided Print
Colour Mode
3
N-Up Print*
4
Fit To Page*
*1 When a saddle stitch finisher or finisher is installed.
*2 This setting is used to adjust the line width of vector graphics (black & white printing only). Except for CAD and other
specialized uses, there is normally no need to change this setting. Information on the selections is shown in
"Selections for the line thickness
*3 Paper sizes that can be used with this function are A3, B4, A4, 11" x 17", 8-1/2" x 14", and 8-1/2" x 11". (This function
may not take effect with some print methods.)
*4 Only effective when printing PDF, JPEG, and TIFF files.
1 - 999 sets
• Portrait
• Horizontal
A3, B4, A4, B5, A5, 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11", 7-1/4" x 10-1/2",
5-1/2" x 8-1/2", 8k, 16k
• Centre Tray
• Finisher Upper Tray / Finisher Lower Tray*
• Right Tray
Plain Paper, Letter Head, Pre-Printed, Pre-Punched, Recycle Paper, Colour
0-9
• 1-Sided
• 2-Sided (Book)
• 2-Sided (Tablet)
• Colour
• Black & White
• 1-Up
• 2-Up
• 4-Up
• (Use Fit to Page)
• (Do not use Fit to Page)
setting" (page 25).
24
Selections
1