Assembly And Operation - Worx Powershare WG170 User Manual

O4
ASSEMBLY & OPERATION
Action
ASSEMBLY
Assembling the Safety Guard
Mounting the Edger /Trimming
Support Wheels
NOTE: There are three optional
positions for the Edger /Trimming
Support Wheels to attach when
assisting in Trimming and Edging.
Fig. B1 is for Edging. Fig. B2 and B3
is for Trimming.
Installing and Removing the Battery
Pack
Your Battery Pack is UNCHARGED
and it must be fully charged once
before it is used.
Checking the Battery Condition
Charging the Battery Pack
More details can be found in char-
ger's manual
WARNING! The charger and
battery pack are specially
designed to work together so do
not attempt to use any other devic-
es. Never insert or allow metallic
objects into your charger or battery
pack connections because of an
electrical failure and hazard will
occur.
3 in 1: Trimmer / Edger / Mini mower
P
OPERATION
Safety ON/OFF Switch
Figure
after the trimmer has been
See Fig. A1, A2 switched off; wait until it has
completely stopped then lay down
the tool.
See Fig. B1,
operation. Make sure motor is up
B2, B3
to full speed before trimming or
edging.
Adjusting the Shaft
Adjusting the Auxiliary handle
Using the Flower Guard
See Fig. C
Trimming
- Adjusting the Trimmer Head
See Fig. D1
- Trimming / Mowing
NOTE:
● For trimming/mowing Fig. J1,
please mount the wheels following
Fig. B3. For trimming in Fig. J2,
See Fig. D2 please mount the wheels following
Fig. B2.
● You could also use the machine
without the guide wheels on the
guard when trimming.
Edging
- Main handle rotation
- The main handle can only be
adjusted at 2 angles of ±90°.
WARNING! The cutting
head continues to rotate
WARNING!Make sure
that line is fed out before
See Fig. E
13
See Fig. F
See Fig. G
See Fig. H
See Fig. I1, I2,
I3, I4
See Fig. J1, J2
See Fig. K1, K2
EN