Intended Use; Assembly & Operation - Worx WG173E.9 Manual

SUGGESTED BATTERIES
AND CHARGERS
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Choose
the type according to the work you intend to
undertake. Refer to the accessory packaging for
further details. Store personnel can assist you and
offer advice.
NOISE DATA
A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection
VIBRATION INFORMATION
14
Typical weighted vibration
Uncertainty
WARNING:The vibration emission value
during actual use of the power tool can differ
from the declared value depending on the ways in
which the tool is used dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well
maintained
Using the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration accessories are used.
And the tool is being used as intended by its design
and these instructions.
This tool may cause hand-arm vibration syndrome
if its use is not adequately managed
WARNING:To be accurate, an estimation of
exposure level in the actual conditions of
use should also take account of all parts of the
operating cycle such as the times when the tool
is switched off and when it is running idle but not
Cordless Grass Trimmer
Type Capacity
WA3014 4.0 Ah
WA3880 2.0 A
L = 75.2 dB(A)
pA
3.0 dB (A)
L = 89.6 dB(A)
wA
3.0 dB (A)
< 2.5 m/s²
a
h
K = 1.5 m/s²
actually doing the job. This may significantly reduce
the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instruc-
tions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti
vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibra-
tion tool use across a number of days.

4. INTENDED USE

The trimmer is widly used for cutting grass and sim-
ilar soft vegetation and for trimming grass edges.
5.ASSEMBLY & OPERATION
Action
ASSEMBLY
Assembling the Safety Guard
Mounting the Edger /Trimming
Support Wheels
There are three optional
NOTE
:
positions for the Edger /Trimming
Support Wheels to attach when
assisting in Trimming and Edging.
Fig. B1 is for Edging. Fig. B2 and B3
is for Trimming.
Installing and Removing the Battery
Pack
Your Battery Pack is UNCHARGED
and it must be fully charged once
before it is used.
Checking the Battery Condition
Charging the Battery Pack
More details can be found in char-
ger's manual
WARNING The charger and
!
battery pack are specially
designed to work together so do not
attempt to use any other devices.
Never insert or allow metallic objects
into your charger or battery pack
connections because of an electrical
failure and hazard will occur.
OPERATION
o C or less
Figure
See Fig. A1,
A2
See Fig. B1,
B2, B3
See Fig. C
See Fig. D1
See Fig. D2
EN