Table of Contents
Advertisement
Setting and Routing IR Ports
IR commands can be routed between HDBT inputs, HDBT outputs, IR inputs (5 to 6) and IR
outputs (5 to 8).
To route IR commands, click a white routing button within the matrix. For example, to route IR
commands between input HDBT 6 and HDBT 5, click the routing button connecting them in the
matrix:
IR 5 to IR 8 (in the Outputs row) enable connecting an external IR sensor/emitter to
send/receive IR signals (5, 6, 7 and 8) via HDBT inputs 5, 6, 7 and 8 respectively.
IR 5 and IR 6 (in the Inputs column) enable connecting an external IR sensor/emitter to
send/receive IR signals (5 and 6) via HDBT outputs 5 and 6, respectively.
Click IR inputs or outputs to view the IR routing status and change the port label (see also
Changing HDMI Input Port Settings
on page 47).
VS-88UT - Routing VS-88UT Ports
Figure 72: Routing Settings Page – IR Routing
on page
29
and
Changing the HDBT Output Port Settings
Kramer Electronics Ltd.
52
Advertisement
Table of Contents
