Kramer VS-88UT User Manual page 37

2. Perform the following actions, as required:

Change the Port Label name.

Check/uncheck HDCP Support.

Check/uncheck Force RGB.

Check/uncheck Force 2LPCM.

View the Routing Status.

Set Extra Range to ON or OFF.

Select Followers drop-down boxes for AUDIO, RS-232, IR, and USB signals.
The selected port signals will now follow the video signal (see
Input Followers
3. Click Save.
Selecting the HDBT Input Followers
When selecting a follower to the input signal, this follower is routed together with the input
signal, to the selected output. When routing HDBT signals, you can define AUDIO, RS-232, IR,
and USB signals to follow the video signal.
The follower signals are applied in the next routing step.
Figure 46: Routing Settings Page – Input HDBT 5 Followers Settings
For example, when routing input HDBT 5 to the HDBT 6 output, HDBT 5 audio is routed to the
output.
Figure 47: Routing Settings Page – Input HDBT 5 Routed to Output HDBT 6
VS-88UT - Routing VS-88UT Ports
on page 35).
Kramer Electronics Ltd.
Selecting the HDBT
35