Canon WUX7000Z User Manual page 215

Projector Web Screen Menu
• When IPsec is used, the projector must be configured to match the IPsec operating
conditions set on other devices that will communicate with the projector.
• IPsec operating conditions supported by the projector can be checked on the
projector's web screen.
• Setting [Exempt HTTP from IPsec] to [OFF] will prevent access to the projector's web
screen if IPsec is accidentally enabled on other devices used for communication with
the projector.
To avoid blocking access, you can configure this setting to exclude HTTP communication
from IPsec.
• [Standby power setting] is set to [Normal] and cannot be changed when IPsec is
enabled.
• Enabling IPsec will require correct IPsec settings on other devices connected to the
projector, such as computers.
• IPsec settings cannot be changed when [DHCP] (IPv4) is enabled.
• When IPsec is enabled, [DHCP] (IPv4) and [Auto settings] (IPv6) cannot be changed.
• When IPsec is enabled, [TCP/IP] (IPv4) and [Manual settings] (IPv6) cannot be
changed.
215