Canon WUX7000Z User Manual page 110

Special Arrangements
The area between the starting and ending markers is called the blending area.
Shading is applied to this area, and the brightness is adjusted to match
portions that overlap with other areas. After you complete settings for one
image, do the same thing for the other one to specify the blending area. Adjust
the settings to make the blending area for each image the same.
5
Set [Marker] to [Off].
■ Adjusting the Overlapping Area
Adjust the overlapping area to create a smoother transition between projected
images.
Matching Colors in the Overlapping Area
In overlapping projection, portions of
images in the overlapping area that pick
up other colors or are miscolored may
be more noticeable. You can make this
overlapping area appear less distracting
by performing [Color blending
adjustment].
1
Select [Install settings] > [Professional settings] > [Edge blending] >
[Adjust] > [Color blending adjustment] > [Adjust].
2
First adjust red, green, and blue together by changing the [White] value,
and then adjust [Red], [Green], and [Blue] values individually.
3
Repeat this adjustment on all projectors.
Edge-blending area
110