Canon WUX7000Z User Manual page 98

Connection Procedure
Item
Projector name
Comment
Refresh
Power
Input
Aspect
Image mode
Blank
Mute
Auto PC
Split screen
Split screen
control
Information
5
When the operations are finished, click [Back to top] to return the initial
web screen.
The name of the connected projector is displayed (P212).
Shows notes, such as where the projector is installed (P212).
Refreshes the displayed contents with the most recent information.
Turns projector power on or off.
Select an input signal and click [Apply] to change to that input signal
(P47).
Select an aspect and click [Apply] to change to that aspect (P102).
Select an image mode and click [Apply] to change to that image mode
(P49).
Switches the blank setting on or off (P52).
Switches the mute setting on or off (P54).
Click [Apply] to perform Auto PC adjustment (P131).
Select the setting for split-screen mode and click [Apply] to switch split-
screen display on or off.
Select the control rights setting for split-screen mode and click [Apply]
to switch the side currently under control.
The control results and control error information are displayed at the
top of the screen.
98
Explanation