Canon WUX7000Z User Manual page 148

Menu Description
Reset
> [Image adjustment] >
Restore the current image quality settings to the factory defaults.
Option
OK Resets the image adjustment settings.
Cancel Cancels resetting of the image adjustment settings.
• Performing reset when [Image mode] is set to a profile from [User 1] to [User 5] will
restore the settings originally saved for that user profile.
• Only the setting for the combination of input signal and image mode for the current
projection is reset.
Image priority
> [Image adjustment] >
Select which side image adjustment settings to apply in split-screen mode.
Option
Use the side with control rights as the [Primary] side. For image
Primary adjustment settings that are not configured separately, [Primary] side
settings apply to both sides.
Not available when the [Primary] side has control rights. To reverse the
Secondary side given priority for image adjustment (whether on the left or right side),
switch control rights to the other side and change [Secondary] to [Primary].
• Can be independently configured
Brightness (P140), Contrast (P140), Gamma (P141), Color adjustment (P141), Fine-Tune
Gamma (P146)
• [Primary] setting also applies to [Secondary]
Image mode (P140), Advanced adjustment except Fine-Tune Gamma
[Reset]
[Image priority]
148
Function
Function
(P142 – P145)