Canon WUX7000Z User Manual page 189

Menu Description
Detailed settings (wireless)
> [Network settings] >
Display and manually change the wireless IP address, gateway address, and other
settings. Available only when wireless networking is [On].
Menu
Mode Shows the wireless connection mode (P84).
SSID Shows the access point SSID.
Security Shows the security setting.
Channel Shows the channel used for the connection.
Signal strength Shows actual signal strength, as measured.
MAC address Wireless MAC address of the projector.
Select the method of connection in infrastructure mode.
Wi-Fi Protected
Setup
[Detailed settings (wireless)]
Submenu
Connect in PBC (push-button) mode.
Following the instructions shown, press the button on
PBC
the wireless base station (access point), and, within
2 minutes, select [OK] on the screen.
Connect in PIN mode.
Following the instructions shown, enter the displayed
PIN 8-digit PIN code on the wireless base station (access
point), and, within 10 minutes, select [OK] on the
screen.
189
Function
Function