Menu Description
Input signal settings
> [Input settings] >
Complete input signal settings when the input signal is [Analog PC-1] or [Analog
PC-2]. Use the [ ] / [ ] buttons to adjust the levels as needed.
Perform this adjustment if the Auto PC function (P131) cannot adjust the projected
image correctly.
Submenu
Total dots
Tracking
Horizontal position
Vertical position
Horizontal pixels
Vertical pixels
Horizontal position
Vertical position
Total lines
[Input signal settings]
Adjust the total number of horizontal dots. Adjust it when stripes
are displayed on the screen.
Fine-tune the timing of image generation from signals. Adjusts the
tracking when the image distorts or flickers.
Adjust the horizontal image position to correct horizontal
misalignment.
Adjust the vertical image position to correct vertical misalignment.
Adjust the horizontal image resolution.
Adjust the vertical image resolution.
Vertical pixels
132
Function
Total dots
Horizontal pixels