Status Messages - JEM Glaciator Dynamic User Manual

Status messages

message
OFF
HEAT
READY
DMX
FLUID OUT
CALIBRATION
ERROR
SYSTEM
ERROR
reason
The heaters are Off, the unit is shut down. If the countdown
clock is shown this indicates the shutdown procedure is in
progress.
The unit is heating up to operating temperature.
The heater is at operating temperature, but Fog is not turned
on (RUN set to STANDBY).
The heater is at operating temperature and the unit is under
DMX control.
Machine out of fluid. Refill the low-fog fluid reservoir and
operate the prime function in the SETTINGS menu
The machine has detected an error with its calibration settings
and will not operate. Contact Martin Service and Support.
The machine has detected an error in the temperature sensor
and will not operate. Contact Martin Service and Support.
27