Approved Low-Fog Fluid Types And Usage - JEM Glaciator Dynamic User Manual

Approved Low-Fog fluid types and usage

The Glaciator Dynamic may only be used with the genuine Martin JEM low-fog
fluids listed below. Martin supplies premium quality low-fog fluids that are based
on ultra-pure deionized water. No other fluid is suitable for use and such use will
void the warranty.
Use fluid directly from container, do not dilute. Remove cap and safety seal; if
inner safety seal has been tampered with, return product to point of purchase.
Disconnect machine from power source before filling reservoir. When possible,
remove reservoir from machine and carefully fill reservoir to desired level, taking
care not to overfill or spill. Wipe up any spilled fluid with a damp cloth. Replace
cap on container and store upright in a secure location.
J E M L o w - F o g F l u i d , Q u i c k D i s s i p a t i n g
JEM Low-Fog Fluid, Quick Dissipating is a water-based fog formula specially
designed for use in the JEM Glaciator. JEM Low-Fog Fluid, Quick Dissipating
produces a dense pure-white ground-hugging effect, which will disperse and
evaporate before any visible rising and heat exchanging. This light-density fluid
formula has a faster dispersion rate and is less dense than the benchmark JEM
Low-Fog Fluid. JEM Low-Fog Fluid, Quick Dissipating combines a low density
and reduced hang time for the precision of performance based art in clubs,
theatres and touring applications in addition to fixed installations and special
effects design.
J E M L o w - F o g F l u i d
JEM Low-Fog Fluid is the industry standard water-based low-fog formula
specially designed for use in the JEM Glaciator. This benchmark fluid is the
automatic choice of most users and is the most specified low-fog fluid on the
market. JEM Low-Fog Fluid produces a dense, pure-white ground-hugging effect
which will disperse and evaporate before any visible rising and heat exchanging;
which is ideal for dramatic scenes involving moving stage activity such as dance.
JEM Low-Fog Fluid combines a typical density and hang time for the precision of
performance based art in clubs, theatres and touring applications in addition to
fixed installations and special effects design.
J E M L o w - F o g F l u i d , H i g h D e n s i t y
JEMTM Low-Fog Fluid, High Density is a water-based low-fog formula specially
designed for use in the JEM Glaciator. JEM Low-Fog Fluid, High Density
produces a dense pure-white ground-hugging effect which will disperse and
evaporate before any visible rising and heat exchanging. A longer lasting, higher
density low-fog is sometimes required for a more controlled environment and
with its longer hang time, JEM Low-Fog Fluid High Density is well suited for
'waterfall' and 'curtain' type effects or for obscuring scenery and performers in
low-lying clouds. JEM Low-Fog Fluid High Density combines a high density and
long hang time effect for the precision of performance based art in clubs,
theatres and touring applications in addition to fixed installations and special
effects designs.
M a r t i n P r o C l e a n & S t o r a g e F l u i d
Martin Pro-Clean & Storage Fluid is specially designed for optimizing
performance while providing longevity of any effect machine. Martin Pro-Clean &
Storage fluid is the ultimate cleaning solution for Martin atmospheric effect heat
exchangers. This advanced preventative maintenance fluid has been utilized by
Martin service technicians for years of both cleaning and storing effect machines.
Utilizing Martin Pro-Clean & Storage Fluid on a regular basis reduces clogging
21