Grizzly G0462 Owner's Manual page 34

H7924—6 pc. Chisel Set In Aluminum Box
This Lathe Chisel Sets high speed steel blades
and graceful ash handles provide plenty of control.
Handles measure 10" long and chisels measure
15 ⁄ " long overall. Set includes a
1
2
⁄ " round nose, ⁄ " skew,
1 7
2 8
and 1" gouge. All chisels are protected in a tough
aluminum case.
Figure 45. 6 pc. chisel set with aluminum case.
H0507—20" Hollowing Tool
H0508—24" Hollowing Tool
An excellent choice for blind turning or undercut-
ting where reach is restricted. H0507 is designed
for end grain use while H0508 (with a more sub-
stantial steel cross section) is designed for both
end grain and side grain (bowl) use.
Figure 46. Hallowing Tools.
-32-
⁄ " parting tool,
3
16
⁄ " gouge, ⁄ " gouge,
3 1
8 2
H5954—Robert Sorby Stebcentre MT#2
Razor sharp teeth bite into the workpiece for
secure operation and the spring loaded center
point controls the amount of drive or slip. This pat-
ented feature helps avoid the problem of 'dig-in'.
Production turners can also load and unload their
work while the lathe is still running!
Figure 47. MT#2 Stebcentre.
T10117—Big Mouth Dust Hood with Stand
Capture dust from any machine operation with
this Big Mouth Dust Hood. Simply attach a 4" dust
collection hose and adjust the hood right where
you need it. The free standing base eliminates
complicated machine set-ups and the tilting 16
x 12 ⁄ " hood adjusts from 23" to 43" high. Every
7
8
shop needs one of these!
Figure 48. Dust collector with hood.
G0462 Wood Lathe (Mfd. Since 11/14)
⁄ "
3
8