Installation Steps, Overview - Fujitsu PRIMERGY CX400 M4 Operating Manual

3

Installation steps, overview

This chapter contains an overview of the steps necessary to install your server
enclosure. Links take you to sections where you can find more detailed
information about the respective steps:
Ê First of all, carefully read the safety instructions in Chapter
information" on page
Ê Transport the server enclosure to the place where you want to set it up.
Ê Unpack the system, check the contents of the package for visible transport
damage and check whether the items delivered match the details on the
delivery note (see section
Ê Make sure that you have all necessary manuals (see section
"Documentation overview" on page
Ê Components that have been ordered additionally may be delivered loose
with the server enclosure. For mounting refer to the original component
documentation.
Ê Mount the server enclosure into the rack (see section
the server enclosure in/from the rack" on page
Ê Wire the server enclosure. Follow the instructions in section
connecting/disconnecting cables" on page
Ê Connect the server enclosure to the mains (see section
server enclosure to the mains" on page
Ê Familiarize yourself with the controls and indicators on the front and rear of
the server enclosure (see section
CX400 M4
21.
"Unpacking the server enclosure" on page
8); print out the PDF files if required.
"Controls and indicators" on page
Operating Manual
"Installing/removing
37).
51.
"Connecting the
50).
"Important
36).
"Notes on
57).
19