Indicator On Hot-Plug Psu; Indicators Of The Server Nodes - Fujitsu PRIMERGY CX400 M4 Operating Manual

Starting up and operation
6.2.2

Indicator on hot-plug PSU

Figure 25: Indicator on hot-plug PSU
1 Indicator on hot-plug PSU (two colors)
Flashes green when the all server nodes is switched off, but AC
voltage is present (standby mode).
Lights up green when the one or more server nodes is switched on
and functioning properly.
Flashes orange in case of overload, but the power supply unit is still
running.
Lights up orange in case of PSU failure, overvoltage / undervoltage,
overtemperature, fan fail.
6.2.3

Indicators of the server nodes

I
For the description of the indicators of the server nodes, refer to the
operating manuals of the relevant server nodes.
64 Operating Manual
CX400 M4