Important Information; Safety Instructions - Fujitsu PRIMERGY CX400 M4 Operating Manual

4

Important information

In this chapter you will find essential information regarding safety when working
on your server enclosure.
I
Depending on your server enclosure or the installed options some
information is not valid for your server enclosure.
V
CAUTION!
Before installing and starting up a server enclosure, please observe the
safety instructions listed in the following section. This will help you to
avoid making serious errors that could impair your health, damage the
server enclosure and endanger the data base.
4.1

Safety instructions

I
The following safety instructions are also provided in the manual "Safety
Notes and Regulations" or " 安全上のご注意 ".
This server enclosure meets the relevant safety regulations for IT equipment. If
you have any questions about whether you can install the server enclosure in
the intended environment, please contact your sales outlet or our customer
service team.
The actions described in this manual shall be performed by technical
●
specialists. A technical specialist is a person who is trained to install the
server enclosure including hardware and software.
Repairs to the server enclosure that do not relate to CSS failures shall be
●
performed by service personnel. Please note that unauthorized interference
with the server enclosure will void the warranty and exempt the
manufacturer from all liability.
Any failure to observe the guidelines in this manual, and any improper
●
repairs could expose the user to risks (electric shock, energy hazards, fire
hazards) or damage the equipment.
Only valid for non hot-plug components
●
Before installing/removing internal components to/from the server
enclosure, turn off the server enclosure, all peripheral devices, and any
other connected devices. Also unplug all power cords from the power outlet.
Failure to do so can cause electric shock or damage.
CX400 M4
Operating Manual 21