8 ... 10 Nm
Screws: 0.8 Nm
Quick Installation Guide for Solar Power Inverter M88H EU V3 EN 5013240202 02 2018-03-22
Connecting the mains (AC) – Tips for M88H_122 (CF)
► Screw off the outer and inner ring of the AC cable gland
as well to make it easier to pull the AC cable through the
cover.
► Insert the conductors of the AC cable into the terminals
of the AC terminal block in accordance with the phase
assignment, and tighten the terminals (torque 8 ... 10 Nm).
The illustration on the left shows the wiring for a 5-conduc-
tor system with PE and N.
The illustration on the left shows the wiring for a 5-con-
ductor system with PE and N when aluminum cables with
crimp connectors are used.
37