Functions And Settings; Operation; Basic - ProLights ECLIPSEFRESNELJTW User Manual

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

To turn on the ECLIPSEFRESNELJTW connect the supplied main cable to a socket (100-240 VAC-50/60 Hz).
Then the unit is ready for operation. You can also adjust the dimmer and zoom using the knobs.
To switch off, disconnect the mains plug from the socket. For a more convenient operation it is recom-
mended to connect the unit to a socket which can be switched on and off via a light switch.
NOTE - To operate the projector ECLIPSEFRESNELJTW you need a system track. The track system must
be installed and maintained by a suitably qualified person in compliance with latest construction and
relevant legislation. It is the responsibility of the installer to ensure the electrical, mechanical and thermal
compatibility of the track system and the fittings. The connection to the main network of electric distribu-
tion must be carried out by a qualified electrical installer.
ATTENTION - Mains voltage must be switched off before mounting; maintenance; insert and replace
Adaptors; spots and luminaires.

3.2 BASIC

Access control panel functions using the four panel buttons located directly underneath the LED Display
(fig.5).
MENU
Used to access the menu or
to return a previous menu
option
ECLIPSEFRESNELJTW
UP
Navigates downwards through
the menu list and increases
the numeric value when in a
function
DOWN
Navigates upwards through
the menu list and decreases
the numeric value when in
a function
Fig.4- Functions of the buttons
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu
7