Standard features
Radio configurations
MPR-e
Standard features include more radio and site scalability and flexibility for installation teams:
•
Limited need for factory presetting of channel frequency or bandwidth
•
Supports cellular mobile networks, and microcellular network back and common
carrier, private carrier and data networks, and utility haul applications
•
2G, 2.5G, 3G and LTE network compatible
•
Outdoor Unit capacity- and modulation-independent
•
Outdoor Unit can support either split-mount or full-outdoor architecture with the
same hardware
•
Adaptive packet transport improves performance for priority services
•
Output power agility
•
ATPC
•
XPIC
•
Adaptive Modulation
•
Packet-based internal cross-connect
•
Electrical/Optical Ethernet interfaces
•
QoS on the Ethernet traffic
•
Software-based configuration
•
Packet throughput booster for enhanced bandwidth
The following radio configurations are available:
•
1+0 full outdoor
•
1+0 repeater (with MPT-HC V2, MPT-XP, AND 9558HC only)
•
co-channel XPIC full outdoor (with MPT-HC V2, MPT-XP, AND 9558HC only)
used to establish a 2 x (1+0) radio link.
•
1+1 HSB (with MPT-HC V2, MPT-XP, AND 9558HC only) when in Single NE
mode with 7705 SAR configuration (with MPR-e 4.1.0)
Product information and planning
87