Table of Contents
Advertisement
Security session management
MPR-e
NE management by software
The MCT will close automatically after 30 minutes of session inactivity.
This is not applicable in the following cases:
•
When the 15 minutes or 24 hours Performance Monitoring is activated (Normalized,
Adaptive or QoS Ethernet)
•
When the monitoring of the Power measurements or Modem measurements is
activated
•
When the NE is configured in Single NE mode with 7705 SAR
After 25 minutes of idle session, a message dialog will be displayed on the MCT to inform
the user about the expiration of the session.The user has 5 minutes to decide to continue or to
stop his session.
Figure 58
Press the "Stay Connected "button to keep the current session active. The idle period is then
restarted.
Press the "Disconnect" button to close the current MCT session.
If no action is done, the MCT will close automatically after the remaining time displayed on
the message dialog.
Figure 59
shows the expiration message.
Figure 58: Session expiration message
shows the shutdown message.
application
171
Hide quick links:
Advertisement
Chapters
Table of Contents
