7705 Sar And Mpr-E In Single Ne: Mct Launcher Start; Figure 68 Main View: System Overview With Mpt-Hc V2/Mpt-Xp With Xpic Module - Alcatel-Lucent 9558HC User Manual

7705 SAR and MPR-e in Single NE: MCT Launcher
start
MPR-e
Figure 68: Main view: System overview with MPT-HC V2/MPT-XP with XPIC module
In 9500 MPR R4.1.0, the MCT Launcher is the application that interfaces with the 7705 SAR
to show the microwave configuration of the system. This application is the entry point for
accessing each individual MPR-e connected to a 7705 SAR in Single NE mode. For any
supported radio configuration, each MPR-e is accessed individually and its configuration is
performed separately in a dedicated MCT session.
This chapter describes all the screens of the MCT Launcher. The MCT Launcher must be
connected to the 7705 SAR as explained in the
See Software local copy
package CD ROM/DVD ROM and connecting the PC to the console port on the 7705 SAR
(any port having an IPv4 interface) in order to access the MPR-e.
NE management by software application
for information on copying the MCT Launcher from the software
Provisioning chapter.
177