9500 family overview
MPT-HC V2/9558HC connectivity (co-channel XPIC configuration)
70
Figure 20: MPT-HC V2/9558HC connection (optical cable for traffic and coaxial cable
Note: The MPT-HC V2/9558HC must be connected to a fuse or a breaker on a customer
power distribution box.
The recommended value is 3 Amps.
In this configuration, the MPT-HC V2/9558HC units must be installed on the OMT that is
directly connected to the antenna. The two MPT-HC V2/9558HC units must be connected to
the Indoor Section as explained in paragraph
configuration).
for power supply)
MPT-HC V2/9558HC connectivity (1+0
MPR-e