Figure 125 Areas; Figure 126 Ospf Areas Management; Figure 127 Configuration Message - Alcatel-Lucent 9558HC User Manual

MPR-e
1. Configure the Area Identifier and Area Type fields, then click on the Add
button. A configuration message will appear.
2. Click on the OK button.
Note: When the 9500 MPR is used with other equipment, the OSPF interface parameters
of the equipment must be the same as those of the related TMN interface on the 9500 MPR.
The 9500 MPR OSPF parameters are:
→ Hello Interval: 10 seconds
→ Router Dead Interval: 40 seconds
→ Retransmit Interval: 5 seconds
→ Interface Transit Delay: 1 second
→ MTU: 1500 bytes
• How to remove an OSPF Area
NE management by software application
Figure 125: Areas
Figure 126: OSPF Areas Management
Figure 127: Configuration message
231