Switching On; Setting The Time - Roberts CR9953 User Manual

Switching on

1. Place your clock radio on a flat surface. Plug the power cord into the wall
socket and switch on.
2. After a few seconds the time, day and date will set automatically. Your
clock radio is fitted with a long life back-up battery to maintain the
factory set time, day and date. The built in calendar function will
automatically adjust for summer/winter time.
See section on Backup battery on page 13.
Should the time require adjustment follow the procedure shown in the
next section.

Setting the time

1. Press and hold down the Time button.
2. Whilst holding down the Time button press the Up or Down buttons
to set the time. Release the buttons when the correct time is reached.
The clock uses a 12 hour display with an AM indicator. Ensure that the
correct 12 hour cycle is selected.
5
Date
Month
AM
Sun
Mon
Tue
Wed
Thu
Fri
Sat
CR 9953
C H R O N O L O G I C
IV AUTO SET
with Instant Time Set
Computerised Time Control System
Time
1
Up
2
AM
2
Down
TUNING
Low
Batt
FM
1 2
MW
CALENDAR CLOCK RADIO
Date Month
Low
Batt