Safety Instructions - MobileDemand T1150 User Manual

SAFETY INSTRUCTIONS

Read the safety instructions carefully and thoroughly. Note all cautions and warnings on the equipment or in the user
manual.
Keep this equipment away from humidity and high temperatures.
Lay this equipment on a stable surface before setting it up.
Do not leave the equipment in an environment where storage temperature is above 60°C (140°F) or below -20°C (-4°F),
which may damage the equipment.
You should operate this unit under maximum ambient temperature of 50°C (120°F) or under 60°C (140°F) for light-
loading applications.
•
If storing for up to three months: -20°C ~45°C (-4°F ~113°F)
•
If storing for longer than three months: 23°C (73°F)
•
Recommended storage conditions: Battery Capacity: 30 ± 5%, Humidity Range: 65 ± 20% RH
•
Battery Charging: 10°C ~45°C (50°F ~113°F)
•
Battery Discharging: -20°C ~60°C (-4°F ~140°F)
•
Maximum Battery Discharging Performance: 25°C (77°F)
•
Note: Do not charge battery in temperatures below 0°C or above 45°C (32°F or 113°F)
Keep the power voltage within safety range and adjusted properly to the value of 100~240V before connecting the
equipment to the power outlet.
Always unplug the AC power cord before installing any add-on card or module.
Place the power cord where people will not step on it and do not put anything on the power cord itself
Always keep strong magnetic or electrical objects away from the T1150
Never pour liquid into any of the openings as it may damage the unit or cause electrical shock
Should any of the following situations occur, have a service personnel check the unit:
•
Power cord or plug is damaged
•
Liquid penetrated the equipment
•
Equipment was exposed to moisture
•
Equipment does not work well or it does not work as instructed
•
Equipment was dropped and damaged
•
Equipment was obviously broken
Contact Service online at: www.ruggedtabletpc.com/contact
Green Product Features
•
Reduced energy consumption during use and stand-by
•
Limited use of substances harmful to the environment and health
•
Easily dismantled and recycled
•
Reduced use of natural resources
•
Extended product life through easy upgrades
•
Reduced solid waste production via take-back policy
Environmental Policy
The product can enable the proper use of parts and recycling. Do not dispose at end-of-life
Contact the local authorized point of collection for recycling and disposal for end-of-life products
or call technical support at 855.501.TECH (8324).
20