Fingerprint Scanning - MobileDemand T1150 User Manual

USING SOFTWARE APPS

Fingerprint Scanning

Before you can use the fingerprint scan pad on the back for security or identification, you will need to configure the
fingerprint tool to recognize specific fingerprints.
To install and use the test tool
• Tap the Start button in the lower left side of the system tray, then double-tap the AS602020 image to start the
installation.
• Follow the prompts to complete the installation, then double-click the shortcut image to run the assistant.
AS602020 Host Program shortcut image on the desktop
• In the Serial Port Utility, do the following, then tap Connect for the T1150 to find the scan pad.
• Under Communication Information, select Serial, then a serial port from the COM Port drop-down.
• Select either "9600" or "115200" from the Baud Rate drop-down.
• Under Send Command, select "Enroll" from the Command drop-down, enter the Template No value to identify
the fingerprint, press and hold the fingerprint on the scan pad on the back, then tap Send and wait for the results
to appear in the Received Results box on the right.
16