Abus CASA10010 Installation Instructions Manual page 47

Network settings
The network connection data is set here.
NIC Typ
Device IP Address
DHCP
Device Port
Subnet Mask
Default Gateway
MAC
HTTP Port
Set the transmission speed of the installed
network card here.
Enter the IP address of the IP alarm
module here.
To have the address assigned by a DHCP
server you have to enable the DHCP
checkbox. The device must then be
restarted for the IP address to be assigned
automatically.
Port number of the communication service.
Used for communication between the
modules.
Usually 255.255.255.0.
Address of the gateway for Internet access.
Hardware address
network card.
Port number of the web server service.
Required for communication via Internet
Explorer.
47
of the installed