Using The Remote Browser Method - HP ProLiant DL100 G2 Installation Manual

1. Log in to the HP ProLiant Data Protection Storage Server with the
default user name administrator and the password hpinvent. The HP
ProLiant Data Protection Storage Server Management Console and the
Rapid Startup Wizard start automatically.
NOTE:
You can change the administrator name and password
when you configure the server using the Rapid Startup
Wizard. See
2.
To complete network configuration using the Rapid Startup Wizard,
see Configuring the server on the network

Using the Remote Browser method

The storage server ships with DHCP enabled on the network port. If the
sever is placed on a DHCP-enabled network and the serial number of
the device is known, the server can be accessed through a client running
Internet Explorer 5.5 (or later) on that network, using the TCP/IP 3202 port.
IMPORTANT:
Before you begin this procedure, ensure that you have the following:
• Windows-based PC loaded with Internet Explorer 5.5 (or later) on
the same local network as the storage server
• DHCP-enabled network
• Serial number or IP address of the storage server
To connect the server to a network using the Remote Browser method, you
must first ensure that the client is configured to download signed ActiveX
controls.
To enable ActiveX controls
1.
On the remote client machine, open the Internet Explorer web browser
and select Tools > Internet Options > Security.
26
Accessing the HP Data Protection Storage Server Management
console
Rapid Startup Wizard on page 34.
on page 31.