HP ProLiant DL100 G2 Installation Manual page 37

The Summary of settings window opens, displaying your user
name and company name.
6.
Click Configure.
The configuration process begins, displaying a slider bar. When
finished, the Confirmation window opens, indicating that DPM
has been successfully configured.
7.
To start DPM, select Open DPM 2006 Administrator Console
when the Mini-Setup closes. Then, click Close. DPM opens in a
few moments.
IMPORTANT:
When DPM 2006 opens, a help window is displayed. Use the help
information to complete the following configuration tasks:
• Configure the server.
• Install disk agents.
• Create a Protection Group.
HP ProLiant DL100 G2 Data Protection Storage Server 37