Download Print this page

HP ProLiant DL100 G2 1TB Installation Instructions

Data protection
Hide thumbs Also See for ProLiant DL100 G2 1TB:

Advertisement

Quick Links

HP ProLiant DL100 G2 1TB,
2TB, 3TB, and 6TB Data
Protection Storage Server
installation instructions
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Windows® is a U.S. registered trademark of Microsoft Corporation.
Sixth edition December 2005
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
The information in this document is subject to change without notice.
www.hp.com
Important Safety Information
© Copyright 2005 Hewlett-Packard Development Company, L.P.
Windows® is a U.S. registered trademark of Microsoft Corporation.
Læs dokumentet Vigtige sikkerhedsoplysninger på dokumentations-cd'en, før produktet installeres.
Sixth edition December 2005
Product names mentioned herein may be trademarks of their respective
companies as reflected by an associated footnote.
The information in this document is subject to change without notice.
www.hp.com
Prima dell'installazione, leggere sul CD le Informazioni importanti sulla sicurezza.
Les "Viktig sikkerhetsinformasjon" på dokumentasjons-CDen før du installerer dette produktet.
Tärkeisiin turvatietoihin" Documentation CD -levyllä ennen tuotteen asentamista.
Läs dokumentet Viktig säkerhetsinformation på dokumentations-cd:n innan du installerar denna produkt.
*372017-006*
About this document
This document provides procedures for rack installation of an HP
ProLiant DL100 G2 1TB, 2TB, 3TB, or 6TB Data Protection Storage
Server (DP Storage Server). Instructions for installing optional HP
StorageWorks Modular Smart Array (MSA) storage systems are
included with the MSA storage system. HP assumes that you are
qualified in servicing computer equipment, and trained in recognizing
hazards in products with hazardous energy levels.
Regulatory notice
The rating label on the device gives the class (A or B) of the
equipment. Class B devices have an FCC logo or ID on the label.
Class A devices do not have an FCC logo or ID on the label. After you
have determined the device class, see the HP ProLiant Data Protection
Storage Server user guide for complete regulatory compliance notices.
This guide is printed, and also provided in the product kit as a file on
the documentation CD.
Operating system
The HP ProLiant DL100 G2 Data Protection Storage Server is
preloaded with the Windows
system. Prior to power up, deployment instructions found in the HP
ProLiant Data Protection Storage Server user guide should be followed
to enable the successful configuration of the storage server.
Kit contents
1
2
3
4
1
HP ProLiant DL100 G2 1TB, 2TB, 3TB, or 6TB Storage Server
®
(Microsoft
System Center Data Protection Manager (DPM)
software and operating system preloaded)
2
Bezel
3
Power cord
4
Slide rail assembly
5
Bezel brackets and screws
6
Documentation CD
7
Quick Restore CD
8
Service Release CD
9
Safety and Disposal Documentation CD
10
HP ProLiant Storage Server user guide (not shown)
1. HP StorageWorks MSA20 and cables are shipped separately.
®
Storage Server 2003 operating
5
6
7
1
9
8
5200b

Advertisement

loading

Summary of Contents for HP ProLiant DL100 G2 1TB

  • Page 1 About this document 2TB, 3TB, and 6TB Data This document provides procedures for rack installation of an HP ProLiant DL100 G2 1TB, 2TB, 3TB, or 6TB Data Protection Storage Protection Storage Server Server (DP Storage Server). Instructions for installing optional HP...
  • Page 2 Rack planning procedures Slim DVD-ROM Individual HDD status LED The rack resource kit ships with all HP branded or Compaq branded 9000, 10000, and H9 series racks. For more information on the 2 USB ports content of each resource, see the rack resource kit documentation.
  • Page 3 (if desired). 5201b IMPORTANT: HP recommends leaving the rail mounting screws loose until the server is completely installed. This eases installation by preventing binding of the server in the rack. c. Align holes at the other end of the rack with the rail assembly and secure with mounting hardware.
  • Page 4 Slide the server in and out of the rack several times, allowing the in, and that AC power is supplied to the server. rails to position properly. • See the DP Storage Server startup chapter in the HP ProLiant Data Tighten all the rail mounting screws. Protection Storage Server user guide. 5205 Push the server fully into the rack 1.

This manual is also suitable for:

Proliant dl100 g2 2tbProliant dl100 g2 3tbProliant dl100 g2 6tb