Installation And Configuration Checklist - HP ProLiant DL100 G2 Installation Manual

Table 3 Installation and configuration checklist
Steps
1. Unpack server, check kit
contents, and become familiar
with front and back panels of
storage server. Locate and
write down serial number of
storage server.
2. Complete rail installation
instructions, if applicable.
3. Connect cables; (optional)
connect a keyboard, mouse,
and monitor; power on server,
and log in to the server.
4. Access the HP Data
Protection Storage Server
Management console.
• Direct Attach method
• Remote Browse method
• Remote Desktop method
5. Complete the storage server
configuration worksheet.
6. Run Rapid Startup Wizard.
7. Complete system
configuration.
8. Configure storage server
for Web access, if necessary.
16 Setup overview
Reference
See Checking kit
contents on page 18.
See the HP ProLiant rail
installation instructions.
See Cabling the
server on page 21,
Powering on the
and Direct Attach
See Accessing
the HP Storage
Server Management
console on page 25.
See Server configuration
worksheet on page 31.
See Rapid Startup
Wizard on page 34.
See Completing system
configuration on page 39.
See Configuring storage
server for Web access
(optional) on page 41.
server,
method.