Pelpro PP130 Owner's Manual page 16

Using Your Stove
Starting your Stove from an empty hopper
5
Wait 1 minute - LED light will start flashing green once per second.
6
Prime your Stove:
7
1) Quickly turn the dial control from OFF to HI
2) Back to OFF
3) Then back to HI
The feed motor will run continuously for two minutes and the LED light will be solid green.
Once primed, pellets will drop into the fire pot and the LED light will blink green as ignition
starts. This process can take up to 20 minutes.
16
CAUTION:
During this process DO NOT:
• Try to restart, manually add pellets or use any type of accelerant
PelPro Pellet Stove • 7086-171O • 2/20/18
5
6
5
5
4
4
6
6
3
3
2
2
1
1
LO
LO
OFF
HI
OFF
HI
7
pelprostoves.com
7 7
8
8
9
9
10
10
3