Restoring Standalone Mode - HPE FlexNetwork HSR6800 Configuration Manual

# Enable the spanning tree feature globally on Router C.
<DeviceC> system-view
[DeviceC] stp enable
# Create VLAN 3, and add GigabitEthernet 4/0/1 and GigabitEthernet 4/0/2 to VLAN 3.
[DeviceC] vlan 3
[DeviceC-vlan3] port gigabitethernet 4/0/1 gigabitethernet 4/0/2
[DeviceC-vlan3] quit

Restoring standalone mode

Network requirements
Dismantle the IRF fabric in
IRF to standalone.
Figure 17 Network diagram
Configuration procedure
1. Identify the master.
<IRF> display irf
MemberID
*+1
1
2
2
--------------------------------------------------
* indicates the device is the master.
+ indicates the device through which the user logs in.
The Bridge MAC of the IRF is: 000f-e26a-58ed
Auto upgrade
Mac persistent
Domain ID
Figure 17 and change the operating mode of Router A and Router B from
Slot Role Priority
0 Master 1
1 Slave 1
0 Slave 1
1 Slave 1
: no
: always
: 0
CPU-Mac Description
000f-e200-0600 RouterA
000f-e200-0501 RouterA
000f-e200-060a RouterB
000f-e200-050b RouterB
37