Specification; General; Environmental Conditions; Electrical - GE druck dpi 104 User Manual

Specification

General

Environmental
conditions

Electrical

Additional Data

[EN] English - K0394 Issue 3
Display
EMC
Electrical Safety
Pressure Safety
Power supply
The DPI 104 is suitable for indoor use with the following
environmental requirements. It is permitted to use the DPI 104
outdoors as a portable instrument if the environmental
requirements are met
Operating
temperature
Storage temperature -20 to 70°C (-4 to 158°F).
Ingress Protection
Operating Humidity
Vibration
Operating altitude
Pollution degree
* The DPI 104 has been assessed to the European IEC60529
standard as having an ingress protection rating of IP65, but this is
for reliability purposes and not for safety reasons.
Switch input
Alarm output
Analog output
Battery life
RS232/Network
capacity
Materials
Approved
Size
Weight
**The case of the DPI 104 is not suitable for prolonged exposure to
ultra-violet light.
LCD
EN 61326-1
EN 61010-1
Pressure Equipment Directive - Class: Sound
Engineering Practice (SEP).
9V, IEC 6LR61, ANSI/NEDA 1604 battery, OR use an
external 12-24 Vdc 50mA supply.
-10 to 50°C (14 to 122°F).
IP65 *.
0 to 95% relative humidity (RH) non-condensing
Def Stan 66-31, 8.4 cat III.
2000 metres (6560 ft).
2
Maximum impedance: 200Ω (mechanical contact
only).
Type: Open drain Field Effect Transistor (FET)
Maximum (mA): 250 mA; Maximum (V): 24 Vdc.
0.05 to 5 Vdc; Minimum load: 500 Ω;
Accuracy: 0.1% FS at 20°C (68°F) - user mode only.
Temperature coefficient:
0.007% FS / °C (0.0039% FS / °F).
Up to one year for pressure measurements:
Au (power save facility) - On; maximum/minimum,
alarm, Vout, switch - all set to OFF.
For: IDOS UPM, external software, or up to 99 units
in series ('daisy chain').
Case: Acrylonitrile Butadiene Styrene (ABS) **
CE Marked.
Diameter = 95 mm (3.74 in); Depth = 55 mm (2.2 in)
Typical length (with connector) ≈ 120 mm (4.7 in).
350g (12.5 oz).
23
Specification