To Start; Key To Figure A1 (Instrument) - GE druck dpi 104 User Manual

To Start

Key to figure A1
(Instrument)
[EN] English - K0394 Issue 3
Item Description
1. 8-pin connector for external power supplies, RS232/UPM
connections and signal input/output.
•
2. Power on button.
•
Menu mode: Press and hold to show the first menu option. To
move down the menu structure, press repeatedly, or continue to
press and hold.
•
Reject or stop the change to a value.
•
In maximum/minimum mode. Press to show the maximum and
minimum values since the last reset.
= maximum
3. In menu mode:
- On/OFF selection
- Increase/decrease a value
4. Pressure sensor and connector with 320° of turn: gauge (g),
absolute (a) or sealed gauge (sg). Refer to menu operations, page 5.
5. • In menu mode:
- Accepts a menu selection
- Shows the next menu level
•
In Tare mode: Set the pressure value on the display to zero.
•
In maximum/minimum mode. Reset the maximum/minimum
values.
6. Display bezel with 348° of turn.
7. O-ring.
8. Battery connector.
9. Battery: 9 V Alkaline (supplied but not installed). Refer to menu
operations, page 5.
10. Battery clamp with two screws.
Table 1: Key to figure A1
= minimum
- Move the decimal left/right
- Accepts a value
To Start
3