Additional Mouse Synchronization Procedures
To use Manual Mouse Synchronization, perform the following operations on the servers that connect to
the switch.
NOTE:
1. These procedures are performed on the servers attached to the switch's ports, not on the
client computer you are using to access the KVM switch.
2. In order for the local and remote mice to synchronize, use the generic mouse driver supplied
with the Windows operating system. Third party drivers (supplied by the mouse manufacturer)
must be removed.
Windows.
1. Windows 7 :
a. Open the Mouse Properties dialog box (Control Panel > Hardware and Sound >
Mouse).
b. Click the Pointer Options tab.
c. Set the mouse speed to the middle position (6 units in from the left).
d. Disable Enhance Pointer Precision.
Sun / Linux.
Open a terminal session and issue the following command:
Sun: xset m 1
Linux: xset m 0 or xset m 1 (If one doesn't help, try the other.)
Linux using the Redhat AS3.0 mouse mode: xset m 1
91